SmartMat 100w/m2 7.0m2 700w Underfloor Heating Mat
SmartMat 100w/m2 7.0m2 Underfloor Heating Mat
The SmartMat 100w/m2 7.0m2 underfloor heating mat has a self adhesive fibre glass backing mesh with an ultra-thin twin conductor 3mm heating cable pre attached, ensuring minimal increase to the existing floor height. The function of the matting system is to provide a warm floor. Superior product design ensures a speedy installation with an even heat across the complete floor surface, whilst allowing unlimited adjustment of the heating element to suit irregular formats.
Tools needed for Installation of the SmartMat 100w/m2 7.0m2
You will require the following items to install and test the floor warming systems.
- Tape measure
- Drawing pad and pencil
- Utility knife
- Cable strippers
- Screw driver
- Resistance tester (multimeter)
- Insulation resistance tester
You will also need the appropriate tools and materials to install your finished floor surface; these will probably include products like self-levelling compound,insulated backer board, notched tile trowel and various other tools and materials for your specific project.
|Mat Length||14 m|
|Mat or Kit||Mat Only|
|Mat Type||Timber Base|
|Mat Width||0.5 m|
|No. of Mats||1|
|Thermostat Choice||Mat Only|
Which underfloor heating system should you choose? If you are undecided which system to install for you, we have some helpful pros and cons for each system which may help you decide which system...