ProWarm Foiled Faced In Joist Batten System
To install the injoist batten system you will begin by securing battens to the sides of the joist with the top of the batten 50mm below the top of the joist. This will allow the insulation to sit flush with the top of the joist.
The pipework can then be placed withing the preformed grooves within the board.
You can finish the installation of this system by installing the finished floor.
|Aluminium Foil Thickness||45 microns|
|Compressive Strength (KPa)||100 kPa @ 10% compression|
|Dimensions||1200 x 350 x 50 mm|
|Fire Classification||Euroclass F|
|Panel Thickness||up to 125mm (in 1.0mm increments)|
|Thermal Conductivity to BS 874 (W/Mk)||0.036|
Which underfloor heating system should you choose? If you are undecided which system to install for you, we have some helpful pros and cons for each system which may help you decide which system...