ProWarm 100w/m2 5.0m2 500w Underfloor Heating Mat
ProWarm™ Electric Underfloor Heating Sticky Mats provide a reliable and effective underfloor heating system that can work with tiles and many other floor coverings.
The ProWarm™ Electric Underfloor Heating Sticky Mats System consists of a thin loose wire, evenly spaced and attached to a sticky glass fibre mesh, which allows for the fastest and most secure installation method of electric underfloor heating.
The resistance heating wire is enclosed in an initial fluoropolymer insulation layer, which is itself is wrapped in a protective metal shielding, before being encased in a final plastic outer sheath. The final diameter of the twin conductor cable is 3mm.
The system is available in a choice of 100 W/m2, 150 W/m2 and 200 W/m2 heat output.
Meets all test requirements of IEC 60335.
CE certified by SGS
Under floor heating provides heat where required, resulting in optimal heat utilization and minimal losses.
Can be laid on any area, or any floor layout.
Close and uniform spacing of heating cables, associated with thermostat controls to select temperature requirements, provides higher comfort.
ProWarm™ underfloor heating systems are designed to be easy to install, with clear instruction manuals.
A wide range of heat loads and sizes ensure suitability to all kinds of flooring.
Please Note: Choose an electric underfloor heating mat that will cover 90% of your floor area. It is best to order slightly less than you need as the cables CAN NOT be cut or shortened.
|Mat Length||10 m|
|Mat Type||Timber Base|
|Mat Width||0.5 m|
|No. of Mats||1|
Which underfloor heating system should you choose? If you are undecided which system to install for you, we have some helpful pros and cons for each system which may help you decide which system...