ProWarm 100w/m2 1.0m2 100w Underfloor Heating Kit
|Range||ProWarm 100W Kit|
- ProWarms high quality ETFE advanced insulation system is made with the highest quality Fluoropolymer's and does not contain any PVC coatings whatsoever.
- ProWarm systems cables are only 2mm in thickness making them one of the thinnest on the market today.
- The advantage of the ultra-thin cables is that they can be directly tiled over if needed.
- ProWarm heating systems are constructed using multi strand wires making them extremely tough.
|Mat Length||2 m|
|Mat Width||0.5 m|
|No. of Mats||1|
|Product Type||Mat Kit|
Which underfloor heating system should you choose? If you are undecided which system to install for you, we have some helpful pros and cons for each system which may help you decide which system...
Frequently asked questions
They are suitable for both heating the entire room or floor only, depending on your requirements. Poorly insulated areas and in very cold conditions, may require additional heating if you wish to e...
All of our products come with a full set of installation instructions, providing a simple step by step guide. Most systems can be installed on a DIY basis. But the final electrical connection shoul...
Yes, you will need a thermostat. However, we do include a range of manual thermostats, touchscreen thermostats, programmable thermostats and wi-fi thermostats in our kits. We offer only the most en...
The correct floor covering should be carefully considered to ensure heat is not prevented from rising into the room by the floor covering. We offer expert advice on floor covering to ensure the bes...