Danfoss - FHM-C1 - Mixing shunt with a low-energy, variable speed pump (Grundfos UPM3).
Mixing Shunts for Floor Heating
The Danfoss compact mixing shunts are used for regulation of flow and supply temperature in hydronic floor heating systems.
The compact, flexible design allows mounting the mixing shunt directly to the manifold on both left and right side, with the primary pipe connection from the side or below.
A self-acting proportional regulator is used to regulate the supply temperature. The regulator ensures that the desired supply temperature to the underfloor heating system always remains constant.
A built-in check valve ensures correct flow direction. An air-vent on top and a thermometer completes the mixing shunt. An optional thermostat protects the floor against too high temperatures.
FHM-C1 is equipped with a low-energy, variable speed pump (Grundfos UPM3 Auto).
The FHM-C1 compact mixing shunt can be mounted directly to the Danfoss manifold system without the use of special equipment.
Should water treatment be used it is essential that dosing instructions of the manufacturer are strictly observed.
Please note that it is recommended that formulations containing mineral oil are avoided.
|Voltage||230V 50/60Hz V|
Which underfloor heating system should you choose? If you are undecided which system to install for you, we have some helpful pros and cons for each system which may help you decide which system...
Spread the Cost
with our flexible finance plans
- No deposit required
- Choice of simple payment options
- Easy, quick application
- Instant decision