Flexible Conduit for Floor Sensing Thermostat per Metre

I use the conduit for the probe on the heatmats I use. This means if the probe fails it can be changed in under ten minutes instead of removing tiles and damaging the heatmat.
Just put a piece of tape on the probe wire were it enters the conduit and if you ever need to change it you can mark the new probe at the same length and this will give you a marker so you know when the probe is in the right spot in the conduit.

Its a bit to big in diameter I buy my own that is smaller, you will use less levelling compound

Needed to gide cable good

The piece I was given is to short so I’m going to have to run to Ipswich for another piece.

Excellent!

Good size for job - stil needed to slightly chase out floor when inset into 10mm insulation boards

Think it could be longer piece

mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

Product fit for purpose; what more can one say?