Product overview
100watt per sqm thin self adhesive twin conductor heating mat for timber floors 0.5m wide x 14m long (7sqm coverage)
eMat Pro for Wood Base Floors is a thin heating mat specifically designed to be installed within a tile adhesive layer. It evenly warms the floor surface eliminating the cold chill associated with hard floor surfaces. It is ideal for tiles on a Wood Base floor and can be installed beneath other surfaces such as laminated floors and vinyl.
eMat Pro is a prefabricated, self adhesive mat with a thin heating cable pre fixed. It is an open mesh design allowing the tile adhesive to bond to an existing floor. The mats are available in a range of sizes from 1-10 square metres. Each mat is 0.5 metres wide. For example, a 5 square metre mat is 0.5m wide and 10m long. The heat output of this product can be regulated using a controller. Generally only one controller is needed for this product, one controller can control up to 33m
2 of
eMat .
Thermostats
There is a choice of wall mounted thermostat the most popular being the
eStat 761.
Click here to choose your thermostatApplications
This product can be used for Bathrooms/En-Suites and Kitchens. In fact, this system can be used in any room as long as the heating mat is covered by a flexible tile adhesive/self-levelling compound.
Advantages
The luxury of a comfortable warm tiled floor, high standard of comfort, provides even heat across the floor surface, economical, no significant floor height increase, simple to install, guaranteed for 15 years, and gives you a dry floor with no mould.
Related information
Technical specifications
| Approval | CE Approved |
|---|
| Area | 7 m² |
|---|
| Cable construction | Twin conductor |
|---|
| Cable thickness | 3.0² mm |
|---|
| Load | 700W |
|---|
| Mat Length | 14 m |
|---|
| Mat Width | 0.5 m |
|---|
| Rated Voltage | 230 V |
|---|
| Resistance | 75.6 Ω |
|---|
| Sheath | Teflon Insulation |
|---|
| Warranty | 15 Years |
|---|
| Width | 500 mm |
|---|
