DEVIreg 132 Floor & Air Sensing Manual Thermostat
DEVIreg 132 wall mounted dial thermostat with a built-in room sensor and a floor sensor for surface mounting. Suitable replacement for the discontinued DEVIreg 121, 131 air sensing only underfloor heating thermostats.
The thermostat is equipped with a built in sensor for control of the desired room temperature & in addition, the thermostat is supplied with a floor sensor for control of the desired floor temperature.
Temperature range 5-35°C.
|Ambient Temperature||Minus 10 to Plus 50 degc|
|Dimensions||82 x 82 x 36 mm|
|Inductive Load||1amp (Power Factor 0.3)|
|Operation voltage||231 volts|
|Power Consumption||Max 3watts|
|Resisitive Load||250v - 16amps|
|Sensing Unit||NTC: 15komhs @ 25deg c|
|Temperature Range||5-35 degc|
|Thermostat Type||Manual Thermostats|
Ratings based on data collected by third party reviewing platform.
22 November 2017 08:50
The parts to supply a nicely packaged so they cannot be damaged and from experience I have never ever had a problem with one of the new parts that are purchased
23 December 2016 11:45
Installed and working well.
Which underfloor heating system should you choose? If you are undecided which system to install for you, we have some helpful pros and cons for each system which may help you decide which system...