DEVIcomfort 100w/m2 DTIR-100 9.0m2 900W Underfloor Heating Kit
The 900watt mat kit is suitable for covering a 9.0sqm of floor area on a timber base floor and is ideal for floor warming.
Depending on the preparation of your floor surface the matting may require additional fixing. After years of experience selling and installing DEVIcomfort, we have found the solutions to fixing to most floor surfaces and have included them in the DEVIcomfort kits. The kit sizes above 12 sqm are made up from the two most competitive mats.
Included in the DEVI matting kit
- Gaffer Utility Tape
- Spray Adhesive
- DEVIreg Touch programmable thermostat
This product can be used for Bathrooms/En-Suites and Kitchens. In fact, this system can be used in any room as long as the heating mat is covered by a flexible tile adhesive/self-levelling compound.
The luxury of a comfortable warm tiled floor, high standard of comfort, provides even heat across the floor surface, economical, no significant floor height increase, simple to install, guaranteed for 20 years, and gives you a dry floor with no mould.
|Cable construction||Twin conductor|
|Mat Length||18 m|
|Mat Type||Timber Base|
|Mat Width||0.5 m|
|Model||DEVIcomfort 100w/m² 9.0m²|
|No. of Mats||1|
|Product Type||Mat Kit|
|Rated Voltage||230 V|
|Thermostat Choice||DEVIreg Touch - White|
|Thickness||3.8 - 4.0 mm|
18 December 2018 06:50
Devimat is very easy to install and always deliver the expected results
26 July 2015 19:05
8 July 2015 23:33
Which underfloor heating system should you choose? If you are undecided which system to install for you, we have some helpful pros and cons for each system which may help you decide which system...