Bal Primer PRIME APD 2.5L

BAL Prime APD Primer is used in the preparation of wall and floor backgrounds prior to the application of any levelling compounds and the BAL WP1 Waterproof tanking Kit.

BAL Prime APD Primer is a modified acrylic polymer dispersion which isolates products contain calcium sulphate. Gypsum plaster, anhydrite screeds, and cement-based adhesives may contain calcium sulphate.

The BAL Prime APD Primer minimises the risk of reaction between the two materials and provides surface strength to friable surfaces. It reduces porosity - preventing air bubbles and prolonging the flow time of levelling compounds and extending the open time of tile adhesives.

Key features and benefits include:

• Pack size: 2.5L
• Coverage: Undiluted: 100-200ml/m2, Diluted (1:1): 50-100ml/m2
• Drying time: 15-30 minutes
• Colour: Blue, ensuring a complete and even coating is obtained

Recommendations for BAL Prime APD Primer

Diluted usage (1:1): Use the diluted primer on dusty or porous plaster walls (when using BAL ready-mixed adhesive) and cement floors
Undiluted usage: Use the undiluted primer on plaster walls and plasterboard (when using a BAL cementitious adhesive), tongued and grooved floorboards, and anhydrite screed floors

Customers who bought this also bought

Delta Board Jointing Tape for Thermal Substrate Insulation Boards

5

£14.75£17.70

Flexible Conduit for Floor Sensing Thermostat per Metre

10

£0.72£0.86

40mm Galvanised Washer & 25mm Screw (Pack of 50)

4

£9.61£11.53

Single Sided Utility Duct Tape (50m)

30

£4.26£5.11

Superspray Adhesive for Matting (500ml)

23

£3.99£4.79

6mm Premium Thermal Substrate Insulation Board PCS Delta Board 1200mm x 600mm

18

£7.90£9.48

Ultra-Tile ProRapid RS Rapid Set Flexible Tile Adhesive (Grey)

1

£9.16£10.99

10mm Premium Thermal Substrate Insulation Board PCS Delta Board 1200mm x 600mm

5

£8.32£9.98

Ultra Level IT 2 Self Levelling Compound

3

£12.30£14.76